Life extension of offshore assets

We reassess ageing platforms and rigs in their real condition, with corrosion and damage included, design the strengthening they need, and report whether they remain fit for purpose.

  • 3core checks: global strength, pushover, fatigue
  • 2jack-up leg damage studies in the North Sea
  • 2000+documented jack-up rig projects
  • 18+years in offshore engineering, since 2008
Real condition, not as-designed

An ageing asset is not the structure on the original drawings

Years at sea bring corrosion, operational damage and wear on members and joints. A life extension study starts by putting that real condition into the model, so every check reflects the asset as it is today.

We then run a global strength check, pushover and fatigue analysis. Where the structure falls short, we design optimised strengthening and confirm it in the updated model, so the asset can be certified fit for purpose.

Jack-up spudcan model used in a strength assessment by Aryatech
When you need it

Three reasons owners call us

  • Near or past design life

    The asset is approaching the end of the life it was designed for, and the owner wants to keep it working.

  • Damage found in inspection

    Corrosion, dented or bent members, damaged braces or leg deformation show up in a survey.

  • New loads or a change of use

    New equipment, a modification or a new location puts loads on the structure it was not designed for.

How we work

From inspection report to fit-for-purpose result

  1. 1

    Collect inspection data

    Survey and inspection reports, measured corrosion and damage records, and as-built drawings.

  2. 2

    Model the asset as it is

    Corrosion, operational damage and the deterioration of members and joints, to simulate its real condition.

  3. 3

    Check its strength

    Global strength check, pushover and fatigue analysis, with local checks on damaged members.

  4. 4

    Design strengthening

    Optimised strengthening wherever a check shows it is needed, re-checked in the updated model.

  5. 5

    Report fit for purpose

    Results and recommendations that support certification of the asset for continued service.

What goes into the assessment

The damage we model and the checks we run

Damage we model

Corrosion and wall lossDented or bent membersDamaged bracesJoint deteriorationLeg and spudcan deformationOperational damage

Checks we run

  • Global strength checkCan the structure still carry its design loads?
  • Pushover analysisHow much reserve strength is left before collapse?
  • Fatigue analysisHow much fatigue life do members and joints have left?
  • Local strength and bucklingAre damaged members still stable?
Recent work

Damage studies we have delivered

See all 16 jack-up projects
Bow leg brace damage study: Aryatech engineering model
Leg damage

Bow leg brace damage study

Three damaged braces on a jack-up's bow leg. We checked the leg's local strength and buckling in operating conditions, compared its behaviour under load, and defined the reinforcement needed for safe operation.

Region
North Sea
Software
ANSYS
Status
Completed
Starboard leg deformation: spudcan preload study: Aryatech engineering model
Leg and spudcan

Starboard leg deformation: spudcan preload study

Deformation was observed on a jack-up's starboard leg. We investigated the likely cause by evaluating different preload distribution scenarios across the spudcan footing.

Region
North Sea
Software
ANSYS
Status
Completed
Software and codes

The tools we assess with, and teach

Software

Follow a link to see our training course for that tool.

Authorized Bentley partner. We supply and train on SACS and MOSES across India and the Middle East. About the partnership

Codes

Applied as each project and owner requires.

  • DNV-OS
  • ABS
  • NORSOK
  • ISO
Questions

What asset owners ask us

When does an offshore asset need a life extension study?

When it approaches or passes its design life, when an inspection finds damage, or when new loads are added. The study shows whether the structure is still fit for purpose and what strengthening it needs.

What information do you need from us?

Inspection and survey reports, measured corrosion and damage, as-built drawings, and the operating and environmental conditions the asset will face.

Which checks do you run?

A global strength check, pushover analysis and fatigue analysis, with local strength and buckling checks on damaged members where they are needed.

Can you design the strengthening as well?

Yes. Where a check shows the structure falls short, we design optimised strengthening and confirm its effect in the updated analysis.

Do you assess jack-up legs?

Yes. Recent work includes a bow leg with three damaged braces and a starboard leg deformation study, both in the North Sea.

Is an ageing or damaged asset due for reassessment?

Send us the latest inspection report and the drawings. An engineer will tell you which checks it needs and come back with a scope.

Or email info@aryatech.net · New Delhi · Kochi · Ras Al Khaimah